News Center

News Center

IC direction confirmation and SMT speed determining factors in SMT mounting
Category: Company News Date:Mar 07

In addition to DIP plugins and EMS assembly, there is also SMT. Therefore, in order to enable everyone to fully familiarize themselves with and understand all the products on the website, the following will focus on the specific SMT patch, so that everyone has learning content and can achieve the above goals, rather than wasting every learning opportunity.


Is the SMT SMT SMT machine available for SMT mounting?

If you want to complete the SMT mounting work, you can use the SMT mounting machine, and this is also something that we all need to know. Moreover, in the use of SMT surface mount machines, the specialized adhesive of the equipment should be used, rather than saying that all adhesives are applicable.


2. Confirmation of IC direction in SMT patch

In SMT patch, the confirmation of IC direction mainly involves the following methods:

Method 1: If it is an IC with pins on both sides, the end with a notch is the direction.

Method 2: If there is a "dot" symbol on the IC, the end with the "dot" symbol is the direction.

Method 3: If there is no indication, the direction is indicated by the bottom left corner of the model printed on the silk screen and IC.


What specifically refers to the post soldering after SMT patching?

It refers to manual welding, mainly for parts that cannot be completed by SMT and wave soldering, such as shells, assemblies, and a small number of connectors. So, it is also an important task, and it is also related to SMT surface mount work.


What determines the SMT mounting speed of the SMT machine?

This issue is related to SMT placement. If an SMT placement machine is to be used, then the placement speed must be considered, as it is related to the quality and effectiveness of the placement. Moreover, this is also an important parameter of the device. The SMT mounting speed of the SMT machine is determined by the specific type and processing requirements of the SMT machine.